Nov

20

Fusible manufacturers

Filed Under Fusible web | 2 Comments

Many thanks to Kim Q., the only one who offered any insights into the subject of permanent wearable appliqués. She said,

If you’re going to applique clothing, keep the fabric contents similar…don’t use a shrinkable cotton on a synthetic garment. I’ve mounted the applique using Heat N Bond, by using a plain old stationery store glue stick, or by using Sulky’s KK2000 spray. The Heat N Bond is permanent, but not my favorite, since it makes that portion of the clothing stiff, just like it does on quilt blocks. If you use one of the other two methods, and it’s a larger sized patch, then you can also use straight pins to anchor it too. Then you’d run a satin or zig zag stitch around the applique.

Since personally I am very quilt-centric, specifically in the area of decorative pieces, I’m always focused on the lightest-weight fusible I can find. If it’s any help, I’m going to offer a list of all the manufacturers that I know of. Again these are very quilty, and there may be products out there that fit more into the industrial or manufacturing scheme. If you know of any, please chime in.

Best of luck, Susan and Lee, in finding the product that works for your needs.

Aleene’s
Bosal Foam and Fiber
Heat n Bond (Therm o Web)
Pellon
Steam a Seam (The Warm Company)

Until next time,
Kay

By Kay Mackenzie

Oct

17

Heat n Bond samples

Filed Under Fusible web, Machine appliqué, Raw edge | 2 Comments

The Heat-n-Bond fusible samples are going off to Jen Martin. The cool thing is, Jen had been thinking of doing a thorough investigation of fusibles, and has agreed to let us in on her results! Thank you Jen, we’ll really be looking forward to your comprehensive review of different brands.

On the last post, a few questions came up in the comments about fusibles.

Dolores wrote:

It might be quite interesting. I used (horrors) the Heat and Bond heavyweight and it really turned out stiff. It was the only one I had on hand but I would love to try others.

Dolores, the heavyweight (Ultra Hold) is not meant to be sewn through. It’s more for projects like fusing something onto a totebag.

Debbie wrote:

I use several types myself, it all depends on the type of projects that I am working on. I find some too stiff, but great for machine quilting and the lighter weight is hard to peel the backing. Then there is wash away, haven’t tried washing it yet, since I use that on wall projects.

Is the lighter weight with the hard-to-peel paper, by, chance, Wonder Under? I started having that problem with it myself. That’s why my current favorite is Shades SoftFuse. I’m sending some of that to Jen along with the Heat n Bond, to be included in her comparison.

Also, I’ve never heard of wash-away fusible web. Could you by chance be talking about some type of stabilizer or interfacing instead? What product are you talking about? Inquiring minds and so forth. :)

Marcia wrote:

Would you like to have the opinion of a newbie trying to work with them? If so, I could do that for you. I have my Rose of Sharon die from Accuquilt, but have not tried it. I would be happy to test the differences in these, using that die.

Marcia, I haven’t used any of the Accuquilt cutters, but just a word to the wise… my understanding is that you have to prefuse the fabric first, before running it through the cutter. If you cut the shapes first, there’s no way you can get the fusible on them! Also, prefusing means that you can’t cut out the center of the fusible.

My pal Kim Jamieson-Hirst loves her Accuquilt and has played with it a lot, so go check out her blog at Chatterbox Quilts Chitchat.

Angie wrote,

Would you believe I inherited a bolt of the Ultra Hold? It does leave a stiff applique piece, but if one cuts out just the outline of the template and uses only that for your applique piece it won’t be so stiff. I use a 90/14 needle when finishing and the blind hem stitch.

Angie, are you saying that you successfully sewed through the Ultra Hold? I tried it once and had to stop every few seconds to clean the gunk off the needle. Tell us more!

Suzanne wrote,

I am a new appliquer and so far have only done raw edge applique (cuz I’m intimidated by the sewn edge kind!), but I would love to try these. I used another brand that didn’t have a paper backing and ended up pressing the gluey side to my iron! Not smart, not fun. So I’m really taken with the idea of having a paper backing.

Suzanne, first of all, do not fear the appliqué! For the raw edge method that you used, I think you are talking about MistyFuse or something similar. You mention the gluey side… well, it’s all gluey! Myself I prefer having a paper backing. But lots of people happily use unsupported fusibles. The wonderful Sarah Vee has a MistyFuse tutorial posted on her blog. Go check it out!

StrayStitches wrote,

I haven’t tried any of those products before. Have you tried them before and if so, do you like them?

Stray, I’ve tried them all. Read my post on fusible web that was written in response to the Call for Topics. What I’ve landed on is SoftFuse.

Okay, I take that back. I’ve never tried Heat n Bond nFeather Lite. It may the most comparable Heat n Bond product. I’ll be interested to hear what Jen has to report.

Laurel Anderson, author of Appliqué Workshop, wrote,

I do two classes called Survey of Fusibles where we try a wide variety of fusible webs and rate them.

What a great class! Laurel’s teaching information is on her website, Whisper Color.

Susan wrote,

I would love to try this am working on my first appliqued quilt and evidently not using the correct fusible (breaking needles). Would definitely like to try this product.

My goodness Susan, what product are you using that breaks the needle? Do tell.

Remember to go to the blog itself to respond to any of this. Replying to your email subscription sends your comment only to me, and everybody wants in on this very important discussion!

Until next time, lots of fun stuff coming down the pike,
Kay
By Kay Mackenzie